Part of a painting

This painting didn’t quite turn out, but I really liked this one part, so felt like I should try to crop it just to get it by itself. I liked how I caught a sense of light on the distant mountain. I also liked how I didn’t think about this part one bit, I just dabbed the paint brush on there, so the result is nice and loose. (The rest of the painting, not the same can be said for, unfortunately). This big rock outcropping, with the shadow side facing me, was in the foreground, and I knew that it would be hard to get, but wanted to try anyways. Not so successful. At least when it is cropped way down like this, it looks more like a rock outcropping in the foreground (rather than an unidentifiable mass).

I camped at Smith Rock State Park and this was one of the paintings I did while I was there, looking west towards the Cascades, with the edge of Smith Rock in the foreground. The trip was a lot of fun, the painting I did however was not so successful.

Here is the cropped version:

IMG_1306 2


Here is the original below. I really go carried away with the “rim rock” lines in the distance — I made them too straight. And the rock that is shadowed, it is just too big of a shapeless mass. Maybe some day I’ll understand how to integrate something like that into a painting but for now it is just beyond me, to be honest. I think that it should have been darker in value than the background (rather than lighter) and probably if it didn’t take up so much space, that would help.

I found painting these big rocks to be pretty challenging in general. Really hard to simplify!

IMG_1306 3

From High Above

I sat on a the edge of a cliff to do this painting. Okay, “sat” isn’t quite the right word, but the cliff is pretty close by. This is a really cool spot overlooking the Willamette Valley to the east. I hadn’t been here for a long time; for some reason the “authorities” welded shut the access gate, although jumping over the fence is actually pretty easy because it is not very high. A couple other people were there at this spot at the same time as me, enjoying the view.

With this painting I struggled to get the cliff part to come forward and the background to go back. I did have a real hard line on the horizon at first, and blurring that out seemed to help. I also tried to make the actual cliff real visually busy, to bring it forward.

The “buildings in the distance” effect I was trying to go for was somewhat effective I suppose.




At the end of the day

I walk by this spot often, at the park near my house. It looks like this for about an hour a so a day, as long as the sun is out. For most of the day, through late afternoon, the sun is not low enough to cast these dramatic shadows: mostly, the entire ground is just a mass of shadows. It sounds pretty simplistic when I write it, but it is a surprisingly dynamic place. Last week I came to this spot to try to paint and there wasn’t anything — no dramatic shadows, no sunlight shining between the trunks. Because I came too early.

It seems like even in late afternoon there should be at least a little bit of a trunk shadow, a bit of line and definition to the shadow, but I think because these trees here are so close together, and they have so much interlocking foliage, that there is basically a blob of a shadow until the very end of the day, when the sun is almost setting.

It took two tries to get anything reasonable — and by the time I was on the second painting, I was mostly working from memory, as a cloud bank had obscured the sun more or less. This was at the end of a rather long day at work/school but it felt good to get out lay down some brush strokes. I think I captured a little bit of my mood, not exactly impatient, but decisive. Not waiting around to get it perfect. Which in many ways is just the kind of attitude I need for painting.


Another windy day

It was pretty rainy for most of the day but late afternoon and into the evening it finally broke, with intermittent blue sky showing through. It was windy, with loose masses of cloud fragments spinning through the air.

I went to my favorite spot of late, the big vacant lot at Marcola Road at 21st or there abouts, in Springfield Oregon. I like it because it is big and open and relatively undeveloped, so I can get a sense of wild nature without going too far from home. There is a big sky with lots of energy. At one point today I was rained on.  It was cold too.

My painting today was inspired by the one I did a week ago or so. Interestingly, here the tree bends inwards, but in the one from last week it bends outwards, towards the edge of the paper. I feel like the fact that it moves in towards the paper rather than out towards the edge gives it more tension. Possibly? Also the fact that the nature curve of the tree seems to go into the windward direction, then all the branches are being blown the other way. That is probably the real source of tension, I suppose, or at least an additional one.

I’m not quite sure it was a successful painting but I did capture the feeling of that wild weather, so I was quite pleased with that. I have really been trying to squeeze some of the formal elements of my paintings to get them a little more dynamic and I think I have been making progress in that direction.


Windy Day

A windy spring storm came through the Willamette Valley this weekend. There was a couple of hours of rolling clouds and glimpses of blue sky before the rain came.

My papers and watercolor stuff was blowing everywhere, but for some reason I didn’t find it frustrating. My bicycle, on its kickstand nearby, tipped over in the wind.

There was something very powerful about the atmosphere, invigorating. The wind wasn’t ominous or oppressive, but warm and uplifting. The wind was powerful and I was powerful too.

I painting near Mohawk and 21st Street, in the big empty lot. It took me a bit to find my subject; I got caught up on the low horizon, big sky thing I’ve been doing for a while. This scene in the painting was right behind me though, at least the scene that inspired this painting.

There were a trees lining the road, growing at sort of odd angles. I exaggerated those angles, which seemed to help capture the sense of movement. The little spots floating around, the random brush strokes, really helps give it a sense of movement, almost like an explosion.





How To Mat and Frame a Painting, specifically using the “floating style”

This post is about my take on framing and matting paintings.

I am not a professional by any means, but I wanted to share what I have learned so hopefully others may be able to learn something too. With a little practice it is really not difficult at all.

There is lots of info on the internet about framing and matting, of course, but this post is going to focus specifically on matting with the “floating” style; i.e. when the edges of the painting are not cover by the mat board. If you look closely at the photo above you can see the white space around the edge of the painting. That’s what I am talking about.

Though it doesn’t seem to be as common as the overlap method, I find this way of matting to work better with the way that I paint.

I like to paint right up to the edge of the paper, and sometimes if even a quarter inch or so of the edge of the painting is covered up by matting, it changes the composition. Or if it doesn’t change the composition, it makes the matting look scrunched.

Of course I could tape the edge of my paper like many water colorists, but I find it simpler to not mess around with taping. And painting right up to the edge also gives I distinct energy to the painting in my opinion.

Start with a frame first. And a painting.

This particular painting is one of my favorites– I did it last year in India, and has been sitting around the house since then. Prints of this painting and others, by the way, are available on my Etsy account.

Any ways, I would love to get this painting in a frame, ’cause it will look good and be protected, too, and then I can hang it up somewhere.


Figuring out what size of frame goes with what size painting is a little tricky. The painting above is on a quarter sheet, so about 11.25 inches by 15. This size I have found to fit almost perfectly in a 16 x 20 frame – more on that later. For now, we can say that it will leave around a 2 inch section of matting around the entire painting.

As a general rule, 11 x 15 or so works well with 2 inch “margins” for the matting and 22 x 30 or so goes well with 3 inch “margins” or so, at least that has been my experience.

In the past I had a 22 x 30 painting with real dramatic colors and I gave it 5 or 6 inch margins in the matting and I liked how it came out. So there is some wiggle room there.

So, as far as cutting things up, I like to use one of those mat cutters they sell on the internet for pretty cheap. Some people talk about how to frame and mat without a mat cutter, but it my opinion it just makes sense to have a mat cutter. If I am going to spend a bunch of time on my painting, I want my matting to look nice too. I also have some official “framing and matting” tape to use, though probably masking tape would work fine too.


The first step is to cut a “backing” for the painting. This will be the same size as the frame and  it is what the matting will attach too.

I usually use just plain white mat board for the backing. There is a place where I live where I can get a big sheet of it for 8 dollars or so, which means it is the cheapest way to do it.


So I am using a 16 by 20 frame, so I have to cut this mat board down to that size. Using the mat cutter, it is pretty easy.


There, just like that. Actually, I messed up a little. I cut it a little too close to 16 by 20 so it didn’t fit very cleanly in the frame. So I trimmed off a little more, making the overall dimensions just under 16 by 20. It is hard sometimes to cut off “just a little” using a mat cutter, as evident in the picture with those curly cues, so be careful! As usual, it is best to get it right the first time.


Next, it is time to cut the front part, the actual matting. First ya gotta pick out a color. This is fun but also challenging. I won’t go into that mess here. I decided to use that dark brown color below for this particular painting.


The matting you have to cut to 16 by 20 or whatever the dimensions of your frame are. IMPORTANT DETAIL: when you cut the mat board, put the nice side down so the cutter doesn’t scuff the top. (Note: I make this mistake sometimes)

So now I have two pieces of mat board that are about 16 by 20 or a little bit under.


Now comes the tricky part: figuring out what size of “window” to cut in the matting.

It is best to make a diagram and write out all the math. Really Otherwise it just gets confusing. Here are some pictures of my math and diagrams for your viewing pleasure.


The upshot of it all is something like this. I have a 16 by 20 frame. And my picture is 11.25 by 15. I add a 1/4 inch to the dimensions of my picture. Add. That part is important. Add. ‘Cause remember this is the “floating style” matting. If it was the “overlapping style” I could subtract. But in this case I add.

So now I have 11.75 by 15.5. Because I added a quarter of an inch on the left side and the right side, the top and the bottom. So it really adds a half inch to my height and width (cause .25 plus .25 is .5).

Okay. Still with me? (It is really easier to do it than to describe it in words.) So now I can subtract 11.75 by 15.5 from 16 by 20.

And I get two numbers: 4.25 (width) and 4.5 (height).

And I divide those by two (because I want half of that space on one side of the painting and half on the other).

So I get 2.125 (2 1/8) and 2.25.

Before going any farther, there is one thing to mention.

Sometimes it is a nice touch to add a quarter inch extra on the bottom margin of the matting. It makes the bottom section slightly thicker. And apparently it is one of those optical illusion sort of things that we can’t really notice but somehow makes the painting look nicer.

In this particular situation, if I add an eighth of an inch to the bottom of my dimensions, (and subtract that eighth of an inch from the top) it works out nicely.

2.25 minus 1/8 equals 2.125 or 2 and 1/8.

And 2.25 plus 1/8 equals 2.375 or 2 and 3/8.

So, in summary, three sides of my sides are 2 1/8 and the bottom is 2 3/8.

That’s why 16 by 20 frames work so nicely in this situation. Of course for other framing situations you’ll have to experiment and see what you can come up with.

So now we have to mark these dimensions onto the mat board. The back of the mat board. Not the front.  The mat cutter makes it very easy to make these lines.

IMG_0811      IMG_0812IMG_0813

So I’ll set it for 2 1/8 for three sides and make a mark. All the way across the mat board. On the back, remember.


And then for the bottom I’ll set it at 2 3/8. Then I’m ready to cut.

Using this little guy, the bevel mat cutter (as is printed on it). It cuts at an angle, i.e. a bevel (obviously).









And I’ll line it up exactly with the line I made on the mat board.




And then I’ll press the blade into the mat board and cut. The hardest part is stopping right on the line on the opposite side. But that’s the idea. Start on the line. And stop on the line. It’s really simple.



And stop. (Yeah I know I made a mistake, as seen below, and made three lines, but I figured it out). And do this for the four sides of the “window” you’re trying to cut out.


When you’re done take a look at how the corners turned out. Mine wasn’t exactly perfect this time, as you can see in this picture below. Like I said, the hard part is stopping at the right point, and I might have gone over a little too far. But I’ll call it good enough, especially since I am just using this frame for myself.


So now I have my mat board cut out!


So this next bit has to do with making the painting “float.” I need to make a slit in the “back” part of the matting. (In this case the white part). The slit needs to be around three quarters of the way up. I can use the painting itself as reference.

And an important note. When I make the mark, I can’t make it all the way to the edge. Because otherwise my mark might show through, in the gap between the matting and the painting. So I have to make it more towards the center.


Then I can use the mat cutter to draw a straight line. Remember it has to be square with the rest of the board. I made the length of the line less then the width of the painting. That way the line won’t show through, like I mentioned above.


Now I can use the bevel cutter again. I want the angle of the bevel to go upwards, toward the top of the painting. Because that is the direction that my tape is going to go.


Now I have the slit cut. The slit has to be less than the width of the painting, otherwise it will show through next to the matting.


Next I am going to tape the front part to the back part. I’ll tape it at the top (remember there is the 1/4 thicker margin at the bottom of the matting. Mark it if necessary.)


So now the front and the back fold together, as seen below.


Okay, now were moving along, as the picture below shows. Almost there!

IMG_0842This next part is a little hard to describe, but really not that complicated. I am going to make two “tabs” using tape. I’ll pull out about around 8 to 16 inches of tape, as seen below. The exact length doesn’t matter too much, but if you make it too short it is hard to work with.


And then fold it back on itself.

IMG_0845But I’ll leave the last one to two inches exposed, so that I can stick it to the back of the painting.

IMG_0846There, now I have my tab, around 4 to 8 inches long. I stick it on to the back of my painting. The exact length doesn’t really matter, like I said, but you don’t want it too short.


And I’ll make two of them, see?


Then the trick is to thread them through that slit in the back of the mat board.

IMG_0849It is a little awkward.



There, now I have the two tabs, poking out through the back. Now I have to adjust the painting so it fits in the matting right.

NOTE: it is easiest to adjust the painting if you primary pull on these tabs, rather than touching the painting itself. It is a little bit of a pain to be honest. This is probably the hardest part of the whole process.

Basically you have to adjust the painting using these tabs, then stick the painting plus mat board assembly into the frame and see if the painting lines up with the matting (when you look at the painting through the glass). If it doesn’t, you have to take it out and adjust. This is the “floating style” that we’re trying to go for.

IMG_0851Eventually you are going to get it so it sits in there properly.  Then you just tape the “tabs” down. As seen below, hopefully, in this (rather poor) photo.


Ta-da! At last. Below you can see how there is a slight margin around the painting. (A quarter inch to be exact).

IMG_0855See, here is a close up to show that floating “space” that I am talking about between the mat board and the painting. It is possible for the back slit or the pen/pencil mark to show through here but since I did the measurements right, it didn’t happen.


I hope that makes sense!  And find me on Etsy if you are looking for a print to practice framing!

Solar Eclipse in Oregon

The total eclipse on August 21st 2017 was worth the hype. 99 percent coverage just isn’t the same. I got to see it in Salem Oregon, in Bush’s Pasture Park, right near downtown.

Photos, of course, don’t do the event justice.

With the watercolor sketch below, I tried to capture some of the strange, ethereal colors that happened during the eclipse.  The sky turned a strange dark blue, the blue of dusk, of the sunset. And the huge corona was visible, at least three or four times the diameter of the sun itself. It appeared wispy and white against the dark blue of the sky, with soft edges (softer than in this painting).

I thought I could see, with my naked eyes, bits of reddish orange around the edge of the moon. Were they solar flares? Imaginary spots? I don’t know.


More than the appearance of the sun during the eclipse, however, I thought it was the physical sensations that were the strangest part of the experience, and the most powerful.  It got so cold! Weird! And the light changed so dramatically. Until the light disappeared!

It is the sort of experience one would never expect to have on this earth.

It all happened so fast. It was supposed to be two minutes or so but it seemed much quicker than that. Almost like the blink of an eye. A heart beat. Perhaps without the sun, my sensation of time was distorted.

Watching the disc of the moon slowly slide across the sun–using the momentarily ubiquitous ‘eclipse glasses’ — was also a strange, fascinating experience. But very different from the actual eclipse. They are like two different events, in a way. The interesting thing about using the eclipse glasses was the possibility of seeing the movement of the moon. The eclipse itself is more like a moment in time.

You don’t see the moon at all, before it moves across the sun. (This makes sense of course now that I think about it but that day, waiting for the eclipse, I half expected to see the familiar white moon hanging out near the sun.) This helps explain why a solar eclipse was such a calamitous event for ancient people: you wouldn’t really know that that is the moon moving across the sun unless some one told you. Even then, it is still a little hard to imagine. The moon takes on many shapes and forms in the sky. But never is it black. A black disc, a black void. There is certainly something sinister about it.


Over all, I wasn’t quite sure what the hype was, exactly, about the solar eclipse. But I figured I should check it out, as long as it was going to be so close to where I live (an hour’s drive). Now I know why people get so excited about it. If you ever have the chance to see a solar eclipse, you should go and see for yourself. That’s really the only way to do it.